Master Bond Consumable
Corrosion and Wear Resistant Coatings and Linings
Solvent-free epoxy coatings against corrosion, erosion, cavitation and abrasion, for tanks, pumps, valves, pipes and above ground, underground and under water pipelines.
Description
Master Bond two component epoxy coatings protect against mechanical erosion and electrochemical attack. They can operate under continuous immersion and guard against flow-accelerated corrosion, particle impingement and cavitation.
Featured grades
- EP21SC-1 – silicon carbide filled for abrasion resistance; -60°F to 250°F
- EP41S-6 – resists methylene chloride, phenol (10%) and nitric acid (30%) for coating tanks, pumps and vessels; -80°F to +450°F
- EP42HT-2 – castable up to 2–3 inches; -60°F to +450°F
- Nanosilica filled grades with thermal stability up to 200–250°C
Applications
- Internal linings and external coatings for above ground, underground and under water pipelines
- Tanks, pumps, valves, impellers, pipe bends and wear plates
- Corrosion under insulation
Specifications
| EP21SC-1 service range | -60°F to 250°F |
|---|---|
| EP41S-6 service range | -80°F to +450°F |
| EP42HT-2 service range | -60°F to +450°F |
| Nanosilica grades thermal stability | up to 200-250°C |
More from Master Bond
- Master Bond Structural Epoxy Adhesives
- Master Bond One Component Epoxy Systems
- Master Bond B-Stage Epoxy Systems
- Master Bond Epoxy Adhesive Films & Preforms
- Master Bond UV Curable Adhesives
- Master Bond LED Light Curable Adhesives
- Master Bond UV Curing Potting Compounds
- Master Bond UV Curable Scratch Resistant Coatings
- Master Bond Potting and Encapsulation Compounds
- Master Bond Conformal Coatings
- Master Bond Silicone Systems (MasterSil)
- Master Bond Polysulfide Modified Epoxies
Featured products
All products →
Component
Powertech OFX3 3-Blade Offshore Stainless Propellers
Powertech OFX3 3-blade stainless propellers, 15.25 in diameter, 14–28 in pitch, RH/LH, for 4.75 in gearcase; aggressive cup, high rake and X-cut geometry.
Equipment
Variable Speed ID Plater
Variable-speed drive with polypropylene flow chamber for plating inside diameters, conducting plating current up to 150 amp.
Component
Low Inertia High Torque Clutch
Pneumatic low inertia high torque (LIHT) clutch with pancake-style airtube for the highest torque-to-size ratio in the WPT range; suited to marine winches, steel shears and metal forming.