MG 24-12 VDC 3 A -i

Name: MG 24-12 VDC 3 A -i
Brand: WhisperPower

Model 60110030

Galvanically isolated 24 to 12 VDC step-down converter, 3 A, supplying stabilised 12 VDC to devices on a 24 V battery system.

Description

The **WhisperPower MG 24-12 VDC 3 A -i** (part number 60110030) is a galvanically isolated DC-DC step-down (buck) converter that supplies stabilised 12 VDC to devices from a 24 V battery, with high efficiency and minimal heat output. ## Key features - Voltage step-down and stabilisation - Galvanic isolation (500 VAC) – separated power circuits for extra stability - Industrial design for high reliability and long life - Silent operation with temperature-controlled fans - No interference with radios, VHF or other sensitive equipment - Plug-and-play installation; can be run in parallel for high-demand loads ## Technical data - Input: 24 VDC nominal (20–35 VDC within spec) - Output: 12.5 VDC nominal, adjustable; accuracy 3% - Output current: 3 A; continuous power 36 W, maximum 38 W - Efficiency: >87%; no-load consumption <25 mA - Operating temperature: -10 to +40 °C; IP20 - Dimensions: 50 × 85 × 88 mm; weight 0.25 kg - Standards: EN61000-6-3, EN61000-6-2, LVD 2006/95/EC, Automotive EMC 2004/104/EC, RoHS 2011/65/EU

Specifications

60110030	MG 24-12-3-i
Length x width x height, mm (in.)	50 × 85 × 88 (2 x 3.3 x 3.5)
Weight, kg (lb.)	0.25 (0.6)
Converter type	voltage step down and stabilization
Nominal input voltage	24 VDC
Input range, specifications met	20 .. 35 VDC
Input range, no defects	0 .. 35 VDC
Nominal output voltage	12.5 VDC
Voltage adjustable	Yes
Output accuracy	3%
Ripple, peak output voltage	1%
maximum power output	38 W
continuous output power	36 W
Maximum output current	3 A
Continuous output current at 40 °C	up to 3 A
efficiency	>87%
consumption no load	<25 mA
Ambient operating temperature	-10°C .. +40°C
Storage temperature	-25° .. +85°C
Relative humidity in use	up to 95%, non-condensing
Galvanic isolation	Yes, 500 Vac
Cooling	Mechanical
Current / short circuit	Restricted by current rating
Overheating, shut down	Power restricted by temperature
Faston in / off, max thread thickness	6 mm²
Mounting holes	dia 4 mm, rh 58 x 168
International Protection rating	IP20
Housing	frame 7
Housing material	Anodized aluminium, ABS end caps
Housing colour	RAL 9011 graphite black
Meets the following Standards	EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.

Supreme 12 VDC - 40 A

Automatic 12 V, 40 A battery charger with three independent outputs, programmable for AGM, GEL, wet and lithium, universal 90–265 VAC input; CE and ABYC compliant.