WhisperPower System / Package Enhanced
Supreme 12 VDC - 40 A
Automatic 12 V, 40 A battery charger with three independent outputs, programmable for AGM, GEL, wet and lithium, universal 90–265 VAC input; CE and ABYC compliant.
Description
Specifications
| 61112304 | Supreme 12 VDC - 40 A |
|---|---|
| Weight | 2.6 Kg / 5.7 lb. |
| Length x width x height, mm (in.) | 295 x 206 x 86 (11.6 x 8.1 x 3.4) |
| Output Current (Maximum) | 40 A |
| Output Voltage Charge | 14.2 - 15.5 V |
| Output Voltage Float | 13.4 - 13.8 V |
| Output Voltage Equalize | 16.0 V |
| Charging Control | 3-step (Bulk / Absorption / Float) |
| DC Output Bank | 3 |
| Selectable Battery Type | GEL, AGM, WET, Lithium |
| Parasitic Current | < 2 mA |
| AC Input Voltage (Nominal) | 100, 120, 220, 230, 240 VAC |
| AC Input Operating Range | 90 - 265 VAC |
| AC Input Frequency Range | 47 - 63 Hz |
| Power Consumption (Full Load) | 700 W |
| Power Factor Correction | Yes |
| Charger Efficiency | > 82% |
| Reverse Battery | Yes, unit shutdown |
| Over Charge | Yes, unit shutdown |
| Over Heating | Yes, unit de-rated and shutdown |
| Output Short Circuit | Yes, unit shutdown |
| Cooling | Forced air ventilation |
| Temperature Setting | Hot, Normal, Cold (no sensor connected) |
| Battery Temperature Sensor | Yes included with 1.5 mtr cable |
| Battery Temperature Sensor Port | RJ12 (battery temp. sensor use) |
| Digital Display Port | RJ12 (optional display panel use) |
| LCD Display (with back lighting) | Charging status, Battery Voltage |
| Warning and Fault Code | A01-02, E01-09 |
| AC Input Connection | Hardwire or AC Cord |
| DC Output Connection | Heavy Duty Studs (3 banks) |
| DC Output Ground | Single Heavy Duty Common Ground Stud |
| Storage Range | -40° to 70°C |
| Operating Range | -20° to 60°C |
| Humidity | 5-95%, RH non-condensing |
| Ingress Protection | IP32 |
Documents
More from WhisperPower
Equipment
AC PowerCube 24 VDC – 14000 VA
Industrial 24 VDC sine wave inverter delivering 230 VAC single-phase at 50 or 60 Hz: 14000 W P30, 12000 W continuous, 28000 W peak, connectable to up to 4 battery banks.
Equipment
AC PowerCube 24 VDC – 7000 VA
Industrial 24 VDC sine wave inverter delivering 230 VAC single-phase at 50 or 60 Hz: 7500 W P30, 6000 W continuous, 15000 W peak, up to 92% peak efficiency, dual DC input.
Equipment
AGM battery 12 V - 100 Ah
Maintenance-free 12 V, 100 Ah (C10) AGM VRLA battery for marine, mobile and solar systems and as a starter battery; 400 cycles at 80% DoD, 1000 A cranking current.
Equipment
AGM Battery 12 V - 145 Ah
Maintenance-free 12 V, 145 Ah (C10) AGM VRLA battery for marine, mobile and solar systems and as a starter battery; 400 cycles at 80% DoD, 1450 A cranking current.
Equipment
AGM Battery 12 V - 200 Ah
Maintenance-free 12 V, 200 Ah (C10) AGM VRLA battery for marine, mobile and solar systems and as a starter battery; 400 cycles at 80% DoD, 2000 A cranking current.
Equipment
AGM Battery 12 V - 260 Ah
Maintenance-free 12 V, 260 Ah (C10) AGM VRLA battery for marine, mobile and solar systems and as a starter battery; 400 cycles at 80% DoD, 2600 A cranking current.
Equipment
AGM Battery 12 V - 55 Ah
12 V 55 Ah AGM (VRLA) maintenance-free battery for marine, mobile and solar systems, inverters, pumps, winches and engine starting.
Equipment
AGM Battery 12 V - 80 Ah
12 V 80 Ah AGM (VRLA) maintenance-free battery for marine, mobile and solar systems, inverters, pumps, winches and engine starting.
Component
Alternator 12 V
12 V replacement alternators for WhisperPower marine and mobile generators (SQ/SC series), available in grounded and ungrounded versions.
Equipment
Battery Equalizer 24 VDC
Battery equalizer for 24 V systems built from two 12 V batteries in series; transfers energy from the higher to the lower battery at up to 2.5 A, drawing under 3 mA when balanced.
System / Package
DC PowerCube 24 VDC - 150 A
24 V, 150 A battery charger and ripple-free DC power supply for large DC systems, fed from shore power (up to 3.5 kW) and/or a Genverter PM generator (up to 4.3 kW), with 12 V / 20 A slave output.
System / Package
DC PowerCube 48 VDC - 80 A
48 VDC heavy-duty battery charger/power supply, up to 4.3 kW, with dual input from shore power (90–264 VAC) and Genverter PM generator, plus 12 V/20 A slave output.