VETUS Component
VETUS Cooling Water Strainers
Raw-water cooling strainers with transparent inspection covers: type 330 (13–38 mm), type 470 (12.7–38.1 mm, 23–200 l/min) and type 1900 (63/76 mm, 570–820 l/min), plus NAVIDURIN® heavy-duty versions.
Description
VETUS cooling water strainers filter raw cooling water ahead of the engine. All have a transparent cover for checking the filter without dismantling; the filter can be cleaned quickly.
Range
- Type 330 – hose connections 13, 16, 19, 25, 32 and 38 mm; e.g. 23 l/min (13 mm), 35 l/min (16 mm); installation kits for 13, 19, 25 and 32 mm hose
- NAVIDURIN® heavy-duty type 330 – with metal inspection lid
- Type 470 – hose connections 12.7 to 38.1 mm; recommended flow 23 l/min (12.7 mm), 51 l/min (19.1 mm), 91 l/min (25.4 mm), 143 l/min (31.8 mm), 200 l/min (38.1 mm)
- Type 1900 – G 2½ / 63 mm (570 l/min) and G 3 / 76 mm (820 l/min) connections
Installation
- Install the strainer above the waterline; only type CWS and the FTR330.M series may be installed below it
- Always fit a seacock behind the inlet water scoop
More from VETUS
- VETUS Electronic Remote Controls ECS
- VETUS Shaft Seals and Flexible Inner Bearings
- VETUS Anti-Siphon Air Vents
- VETUS Bronze Stern Tubes
- VETUS Duplex Stainless Steel Propeller Shafts
- VETUS Electric Propulsion Controls
- VETUS Electronic Engine Remote Controls EC3/EC4
- VETUS E-LINE and E-POD Electric Propulsion Motors
- VETUS Energy Storage for Electric Propulsion
- VETUS Energy Supply for Electric Propulsion
- VETUS Exhaust Goosenecks
- VETUS Exhaust Systems for High-Performance Craft
Featured products
All products →
Equipment
Variable Speed ID Plater
Variable-speed drive with polypropylene flow chamber for plating inside diameters, conducting plating current up to 150 amp.
System / Package
Supreme 12 VDC - 40 A
Automatic 12 V, 40 A battery charger with three independent outputs, programmable for AGM, GEL, wet and lithium, universal 90–265 VAC input; CE and ABYC compliant.
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.
Similar products