VETUS Equipment Enhanced
VETUS Electronic Remote Controls ECS
Rexroth-developed ECS electronic engine controls for single or twin engines from up to four stations, with optional trolling control, CAN-bus communication and auto-diagnostics; for leisure craft and small workboats.
Description
VETUS ECS electronic remote controls are developed by Rexroth and supplied by VETUS. They combine plug-and-play installation with simple operation and have been endurance tested to one million lever actuations.
Key features
- Single- or twin-engine control from up to four control stations
- Optional trolling gear control
- Compatible with all common marine engine types and reversing gears
- CAN-bus communication between components
- Auto-diagnostics showing the current operating state
- Hardware derived from proven automotive applications
Applications
Leisure craft and small workboats.
Accessories
- Low-friction push/pull cables (1.5 m, 2.0 m), ball joints and cable clamps for type 33 and LF cables
More from VETUS
Spare Part
VETUS Shaft Seals and Flexible Inner Bearings
Flexible inner bearings with shaft seals for water-lubricated stern gear: ZWBH monoblock with triple lip seal (25–40 mm) and bronze versions with dual lip seal (25–60 mm), plus replacement seal sets.
Component
VETUS Anti-Siphon Air Vents
Anti-siphon air vents that stop seawater siphoning into the exhaust and engine when the water injection point is less than 15 cm above the waterline; for 13–38 mm hoses, with or without valve.
System / Package
VETUS Bronze Stern Tubes
Bronze stern tubes with mounting flange and outer cutlass bearing for water-lubricated stern gear in GRP or wooden vessels; 25 and 30 mm shaft sizes in lengths from 500 to 2000 mm.
Component
VETUS Cooling Water Strainers
Raw-water cooling strainers with transparent inspection covers: type 330 (13–38 mm), type 470 (12.7–38.1 mm, 23–200 l/min) and type 1900 (63/76 mm, 570–820 l/min), plus NAVIDURIN® heavy-duty versions.
Equipment
VETUS Duplex Stainless Steel Propeller Shafts
Duplex 1.4462 stainless steel propeller shafts with 1:10 taper and keyway to ISO 4566, supplied with key, tab washer and propeller nut with integrated zinc anode; 25, 30 and 35 mm, 1000 mm long.
System / Package
VETUS Electric Propulsion Controls
V-CAN control levers, key switches and displays for VETUS E-LINE and E-POD electric drives and BOW PRO thrusters, including ELPS2, ELPSR2, ELPS2H hybrid and stainless ELCS levers.
Equipment
VETUS Electronic Engine Remote Controls EC3/EC4
VETUS EC3/EC4 electronic engine remote controls: stainless steel control levers for one or two engines with optional trim control, and 12/24 V control boxes for mechanical or electronic throttle and gearshift.
Equipment
VETUS E-LINE and E-POD Electric Propulsion Motors
VETUS E-DRIVE electric propulsion: E-LINE inboard shaft motors (5–22 kW, air- or liquid-cooled) with Swap & Go mounts, the 10 kW E-POD all-in-one pod, and the M2HSET hybrid set for M2 diesels.
System / Package
VETUS Energy Storage for Electric Propulsion
48 V battery banks for VETUS electric propulsion: VELF LiFePO4 lithium batteries (12/24/48 V, 100–300 Ah), AGM deep-cycle batteries and BCLF lithium chargers (30–80 A).
System / Package
VETUS Energy Supply for Electric Propulsion
Shore power cables and IUoU battery chargers for VETUS electric drives; the patented MCV motor controller's Boosted Battery Charge lets a 24 VDC charger charge the 48 VDC propulsion battery pack.
Component
VETUS Exhaust Goosenecks
Exhaust goosenecks that raise the exhaust line above the waterline to stop water backfilling and add noise reduction; for 40–60 mm hose, and LT types from 65 to 152 mm with AISI 316 brackets.
Component
VETUS Exhaust Systems for High-Performance Craft
Compact synthetic MV and MF mufflers (90–150 mm, 11.5–43.5 litres) for fast craft with powerful engines and no room for a waterlock or gooseneck; MV includes a check valve.