VETUS Component
VETUS Flexible Couplings
Flexible shaft couplings for low-noise, backlash-free transmission from engine to propeller shaft: Bullflex, Combiflex, Uniflex 13/16 and KO5 (V-drive), for shafts up to 70 mm, plus the VDR drive.
Description
VETUS flexible couplings connect the propeller shaft to the marine engine. The rubber element gives low-noise, vibration-free transmission without backlash.
Range
- Up to 30 mm shafts – Bullflex, Combiflex, Uniflex type 13 or KO5; maximum misalignment 2°
- KO5 (KO51–KO54) – conical clamping hub for a 100% concentric fit; the only type suitable for V-drives
- Up to 70 mm shafts – Bullflex and Uniflex type 16
- Uniflex 13 – 20, 25 and 30 mm shafts, 4" connection; Uniflex 16 – 30, 35 and 40 mm shafts
- Bullflex 32 – 45, 50, 60 and 70 mm shafts; centering ring for shaft alignment
- VDR – double-acting constant velocity joint with thrust bearing, for large misalignment angles
Accessories
- Stud and bolt sets (M10, M16, 7/16" UNF) for Uniflex/Bullflex couplings, including sets for Technodrive gearboxes
More from VETUS
- VETUS Electronic Remote Controls ECS
- VETUS Shaft Seals and Flexible Inner Bearings
- VETUS Anti-Siphon Air Vents
- VETUS Bronze Stern Tubes
- VETUS Cooling Water Strainers
- VETUS Duplex Stainless Steel Propeller Shafts
- VETUS Electric Propulsion Controls
- VETUS Electronic Engine Remote Controls EC3/EC4
- VETUS E-LINE and E-POD Electric Propulsion Motors
- VETUS Energy Storage for Electric Propulsion
- VETUS Energy Supply for Electric Propulsion
- VETUS Exhaust Goosenecks
Featured products
All products →Accessory
Rocket Launchers
Traditional, gimbaled and fiberglass rocket launchers in poly or teak holding 4-10 rods, in lengths from 27" to 52".
Equipment
100 CFM Breathing Air Filtration Panels
Wall-mount three-stage breathing air filtration panels, 100 CFM with four outlets, plain or with integrated CO-GUARD, ProAir/MedAir 2200 or Matrix Air monitors.
Equipment
Beta 25 Saildrive Engine (18.5 kW / 25 hp)
Beta 25 marine diesel engine with shallow sump, 18.5 kW / 25 hp @ 3,600 rpm, supplied with a Technodrive SeaProp 60 saildrive or with adaptor kits for existing Volvo 110S/120S/130S, Yanmar SD20 or Bukh saildrives. EPA Tier III compliant.
Similar products