Chevron Marine Lubricants Consumable Enhanced
Chevron Marine Fuels
HSFO, VLSFO, MGO and biofuel blends supplied in the US Gulf Coast, US West Coast, Panama and Singapore from Chevron refineries and the Penjuru Terminal.
Description
Chevron Marine Fuels supplies marine fuels that meet customers' needs and regulatory requirements, backed by Chevron's refinery and logistics network. In the Americas it supplies the US Gulf Coast, US West Coast and Panama from refineries in Richmond (CA), El Segundo (CA), Pasadena (TX) and Pascagoula (MS). In Singapore, the Chevron Penjuru Terminal, linked to the Singapore Refining Company joint venture, is the regional fuel oil blending hub, with over 400,000 cubic meters of capacity.
Products
- HSFO: sulphur content above 0.50% by mass, for ships with scrubbers
- VLSFO: made to meet the IMO 0.50% sulphur limit, tested to ISO 8217
- MGO: distillate fuel, typically 0.10% sulphur, for SOx emission control areas
- Biofuel blends: renewable and waste-based biofuels such as FAME from waste animal fats and oils, usable without engine modifications
- Boutique blends
Specifications
| HSFO sulphur content | exceeding 0.50% by mass |
|---|---|
| VLSFO sulphur limit | 0.50% (IMO) |
| MGO sulphur content | typically 0.10% by mass |
| Specification | ISO 8217 |
| Singapore blending capacity | over 400,000 cubic meters |
More from Chevron Marine Lubricants
Consumable
Regal® R&O
Premium rust- and oxidation-inhibited turbine oil for gas, steam and hydroelectric turbines, listed for separators and purifiers on commercial vessels.
Consumable
Taro® Ultra marine engine lubricants
New-generation cylinder oils for low-speed two-stroke crosshead engines, formulated for post-IMO 2020 fuels including 0.50% sulfur blends, alternative and hybrid fuels.
Consumable
Meropa® gear lubricants
Extreme-pressure gear oils in ISO 68–680 for enclosed gears, main propulsion gearing, thrusters, centrifuges and deck machinery; FZG load stage >12.
Kit
FAST™ OnBoard marine lubricant analysis kit
Portable onboard test kit for lubricant, hydraulic, gear, compressor and fuel oil: water (200–10,000 ppm), BN up to 150, insolubles, viscosity and seawater contamination.
Device / Instrument
DOT.FAST® drip oil analysis
Onboard total iron measurement and onshore analysis of two-stroke cylinder drip oil, used to optimise cylinder oil feed rates, adjust BN and monitor engine wear.
Device / Instrument
FAST™ XRF Onboard Analyzer
Portable XRF analyzer for total iron (0–2000 ppm) and BN (0–140 mg KOH/g) in lubricants and cylinder drip oil, no chemical reagents; optional fuel sulfur module.
Remote / Digital Service
FAST™ Onboard App
Mobile app for DOT.FAST users to record onboard test results, pre-register onshore samples, view advisories and sync data with the FAST IT platform.
Consumable
Taro® Ultra Advanced 40
40 BN Category II cylinder lubricant for the latest large low-speed marine diesel engines running on low and zero sulphur fuels including VLSFO, ULSFO, LNG and methanol.
Consumable
Veritas® 800A Marine 30
SAE 30 crankcase oil for large low-speed two-stroke marine engines on all fuel types, also used in oil-lubricated stern tubes; approved by Everllence, WinGD and J-ENG.
Consumable
Taro® XP Series
BN 20–50 diesel engine oils for four-stroke medium-speed trunk piston engines on residual, distillate or biofuels; also approved for stern tubes and FZG 12 reduction gears.
Consumable
Taro® DP and XL Series
BN 20–50 diesel engine oils for medium-speed trunk piston engines burning residual or marine diesel fuel; also suit engine reduction gears that need EP properties.
Consumable
Delo® and HDAX® four-stroke engine oils
Engine oils for medium-speed trunk piston and high-speed four-stroke engines: Delo 1000 Marine, Delo monograde and multigrade oils and HDAX low-ash gas engine oils.