General Propeller Component
Tides seriesOne Shaft Seal Kits
Tides Marine seriesOne shaft seal for smaller single-engine vessels with stainless steel propeller shafts.
Description
The Tides seriesOne shaft seal was designed for smaller single-engine vessels with stainless steel propeller shafts. The housing is produced like the SureSeal seals but with a modified front cap, so the lip seal is not replaceable and the whole seal must be replaced when worn.
Key features
- Shaft diameters from 7/8 inch through 1-1/4 inch in 1/8 inch increments, and metric shafting from 25mm through 30mm
- PTFE machined bearing
- Single-convolution articulating hose option for ski boats with shorter shafts and higher operating RPM (3500 RPM+)
- Multi-convolution articulating hose option for smaller diesel engines (1-3 cylinders) on softer mounts
- Four 316 stainless steel clamps included; one year warranty
Specifications
| Shaft sizes | 7/8" to 1-1/4"; M25 to M30 |
|---|---|
| Stern tube outside dia. | 1.750" - 3.000" and 45mm - 76mm |
| Bearing | PTFE |
| Warranty | one year |
More from General Propeller
- General Propeller Powertech OFX3 3-Blade Offshore Stainless Propellers
- General Propeller Powertech OFX4 4-Blade Offshore Stainless Propellers
- Volvo Penta Folding Propellers
- Volvo Penta Fixed Saildrive Propellers
- Michigan Marine Propulsion MMP Aftermarket Saildrive Propellers
- Michigan Wheel Sailor 2 Propellers
- Michigan Wheel 3 Blade DJ355 Propellers
- Volvo Penta SX Drive Propellers
- Teignbridge 3 Blade Nibral 17 x 19 1.50" Bore LH AC55
- Mercury Fury 48-8M8023090 Propeller
- Mercury Fury 48-8M8023100 Propeller
- General Propeller Mercury Trophy Sport Stainless Propellers
Featured products
All products →
Equipment
100 CFM Breathing Air Filtration Panels
Wall-mount three-stage breathing air filtration panels, 100 CFM with four outlets, plain or with integrated CO-GUARD, ProAir/MedAir 2200 or Matrix Air monitors.
Component
Low Inertia High Torque Clutch
Pneumatic low inertia high torque (LIHT) clutch with pancake-style airtube for the highest torque-to-size ratio in the WPT range; suited to marine winches, steel shears and metal forming.
Equipment
Marine Stage Gangways and Boarding Ladders
Portable aluminum marine gangways for ship and barge access: GW500 straight truss (2000 lb), GW100 bowed truss (one ton), SGW stage gangway (750 lb, 28 in wide), plus a marine boarding ladder.
Similar products