Appleton Marine Equipment
Extending Boom Cranes
Model EB telescoping boom marine cranes built to ABS and API-2C minimum design standards, with painted internal boom surfaces.
Description
The Model EB extending (telescoping) boom crane is used for shipboard, offshore and dockside handling. It has Cr, Ni-Cr or stainless luff and telescope cylinder rods, and the internal boom surfaces are painted. Each crane is load tested at Appleton Marine's Wisconsin plant and supplied with a Test Procedure and Acceptance Report.
Key features
- Minimum design standard: ABS and API-2C
- USCG failsafe operation
- Variety of control options
- Simultaneous operation of two or more functions
- Heat treated 17-4 stainless steel pins
- AISI 316 stainless fasteners (3/4" dia. & smaller)
- Monel grease fittings and continuous welds
- Pedestal interface to suit customer requirements
- 360° continuous rotation with limits available
- Acrylic epoxy marine coating system
- Factory assembled and tested
- Painted internal boom surfaces
Applications
- Naval and commercial shipboard handling
- Offshore and dockside lifting
Specifications
| Minimum design standard | ABS and API-2C |
|---|---|
| Rotation | 360° continuous rotation with limits available |
| Pins | Heat treated 17-4 stainless steel |
| Fasteners | AISI 316 stainless (3/4" dia. & smaller) |
| Coating | Acrylic epoxy marine coating system |
| Cylinder rods | Cr, Ni-Cr or stainless (luff and telescope) |
More from Appleton Marine
- Appleton Marine Field Service, Spare Parts and Refurbishment
- Appleton Marine Straight Boom Cranes
- Appleton Marine Knuckle Boom Cranes
- Appleton Marine Folding Boom Cranes
- Appleton Marine Davits
- Appleton Marine Specialty Boom Cranes
- Appleton Marine Mooring Winches
- Appleton Marine Combination Mooring Winches / Windlasses
- Appleton Marine Offshore Mooring Systems
- Appleton Marine Specialty Marine Winches
- Appleton Marine Horizontal Anchor Windlasses
- Appleton Marine Vertical Anchor Windlasses
Featured products
All products →
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.
Accessory
Fresh Water Filling
Automated function that drains sea water from the BWTS filter and refills it with fresh water to stop organisms clogging the mesh.
Equipment
100 CFM Breathing Air Filtration Panels
Wall-mount three-stage breathing air filtration panels, 100 CFM with four outlets, plain or with integrated CO-GUARD, ProAir/MedAir 2200 or Matrix Air monitors.