Mercury Racing Equipment
Mercury Racing 700 SCi Sterndrive Engine
Supercharged Mercury Racing 8.2 L V8 sterndrive engine rated 700 hp at the transom, with dedicated dry-sump transmission and M6 drive (M8 optional).
Description
The Mercury Racing 700 SCi is a supercharged 8.2-liter V8 sterndrive engine for offshore performance boats. A compact Mercury Racing transmission exclusive to the 700 SCi allows the dry-sump M6 drive to be used with the engine in the same near-transom location as a Bravo One XR installation. A specific camshaft grind, taller charge air cooler, increased boost and custom calibration deliver 700 hp at the transom. The optional X-Haust noise reduction system brings it into compliance with most noise regulations outside the EU.
Technical data
- Rated power at transom: 700 hp
- Full throttle rpm: 4800-5200
- Displacement: 8.2 L; V8; bore x stroke 4.47 x 4.00 in (113 x 102 mm)
- Compression ratio: 7.5:1
- Induction: supercharger with charge air cooling and electronic boost control
- Fuel: 89 octane (R+M)/2, 95 RON; sequential multi-port EFI
- Oil: Mercury Racing NMMA certified FCW SAE 25W-50 synthetic blend
- Cooling: water cooled, thermostat and pressure controlled
- Exhaust: X-Haust or through transom
- Controller: PCM
- Transmission: Mercury Racing NXT1 dry-sump
- Drive unit: M6 (standard), M8; gear ratio application dependent
- Dimensions (L from back of block x W x H): 35.7 x 33 x 27.9 in
- Weight: 1548 lb
- Warranty: 1-year limited for recreational boating
Specifications
| Bore & Stroke | 4.47 x 4.00 IN/113 x 102 MM |
|---|---|
| Cylinders / Engine Configuration | V8 |
| INDUCTION SYSTEM | Supercharger With Charge Air Cooling And Electronic Boost Control |
| FUEL REQUIREMENT | 89 Posted Pump Octane (R+M/2), (95 RON) International |
| FUEL SYSTEM | Computer Controlled Sequential Multi-Port Electronic Fuel Injection (EFI) |
| OIL REQUIREMENT | Mercury Racing NMMA Certified FCW SAE 25-W50 Synthetic Blend |
| GEAR RATIO | Application Dependent |
| WARRANTY | 1-Year Limited For Recreational Boating |
| EXHAUST SYSTEM | X-Haust Or Through Transom |
| COOLING SYSTEM | Water Cooled With Thermostat & Pressure Controlled |
| CONTROLLER | PCM |
| TRANSMISSION | Mercury Racing NXT1 Dry-Sump |
| DRIVE UNIT | M6, M8 |
| LENGTH - FROM BACK OF BLOCK | 35.7 IN |
| WIDTH | 33 IN |
| HEIGHT | 27.9 IN |
| WEIGHT | 1548 LBS |
More from Mercury Racing
- Mercury Racing 300HP 5-Blade CNC Cleaver Propeller
- Mercury Racing 5-Blade CNC Cleaver Propeller
- Mercury Racing Bravo I FS Propeller
- Mercury Racing Bravo I LT Propeller
- Mercury Racing Bravo I OC Propeller
- Mercury Racing Bravo I XC Propeller
- Mercury Racing Bravo I XS Propeller
- Mercury Racing Chopper II Propeller
- Mercury Racing Enertia Eco XP Propeller
- Mercury Racing Lab Finished Revolution 4 Propeller
- Mercury Racing Lightning E.T. Propeller
- Mercury Racing 1100 Sterndrive Engine
Featured products
All products →
Component
Bolts, Nuts and Studs Made to Order
Special bolts, nuts and studs made to order in any metal, alloy and class, including turbine bolts and Duplex / Super Duplex stud bolts.
Other product
Carnival Jubilee
Carnival Cruise Line cruise ship sailing to Bahamas, Caribbean from Galveston, TX.
Component
Powertech OFX3 3-Blade Offshore Stainless Propellers
Powertech OFX3 3-blade stainless propellers, 15.25 in diameter, 14–28 in pitch, RH/LH, for 4.75 in gearcase; aggressive cup, high rake and X-cut geometry.
Similar products